GNSS reception quality is not
a problem anymore.
VEHICLE MOBILE SCANNER
The vMS3D solution takes into account the advantages and disadvantages of each technology, depending on their conditions of use.
It allows rapid measurements, faster than any other technologies
This technology is no longer tightly dependent on GNSS receivers.
When the GNSS receiver provides reliable data (i.e: in open sky environment), the solution relies on its position. If the GNSS fails or disturbance occurs, the system then chooses inertial LiDAR-SLAM.
This independence to the GNSS reception makes this system a versatile tool.
It will work the same in highways or dense urban canyon.
The vMS3D looks like a classic Mobile Mapping System (MMS).
It integrates a 360° camera, a rotating LiDAR, an internal navigation system with GNSS receiver.
the device compatible with 6DOF LiDAR-SLAM available in VIAMETRIS PPiMMS software.
For any motorized vehicle
A new way ro scan urban canyons
with SLAM technology
70km per hour of continuous capture.
Boots up in 5 min
700.000 points per second.
30 Mpx 360° Pictures.
Compatible with all CAD industry standards
Bundled with all accessories and software (Point Cloud Computation)
• No calibration
• Continuous scan
• No limit case - can be used either in urban canyon and open-sky roads
• Simple to set on any vehicle thanks to suction cups system
• PPK-Compatible GNSS
• 2 LiDARs
• SLAM technology
• New generation 360° Ladybug5+ camera
• Centimeter accuracy
• GNSS and IMU
Info or demo ?